BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278196BTC
Διαθέσιμο
Vertiv
Vertiv TDU6000RTL630 5050VA step-down transformer server power supply
Converts 208VAC or 240VAC input to 120VAC output with 94% efficiency, providing 5050VA through ten NEMA receptacles in a 2U rack-tower
- Converts 208/240 VAC input to 120 VAC output for compatible UPS systems
- Delivers 5050 VA and 5050 W continuous power for high-density rack loads
- Provides ten output receptacles: eight NEMA 5-15/20R plus two NEMA L5-30R
- Achieves 94 % AC-AC efficiency to reduce energy waste and heat
- Mounts in 2U rack or tower form factor with included hardware
Step-down transformer for UPS
The Vertiv Liebert TDU6000RTL630 is a step-down transformer that converts 208VAC or 240VAC input to 120VAC output for compatible UPS units. It delivers 5050VA and 5050W of power through ten output connections. The 2U rack-tower design includes a mounting kit for flexible installation. Integrated forced airflow helps maintain rack temperatures.
Suits racks with 120V loads
This unit fits environments where a UPS requires 208VAC input but connected equipment needs 120VAC receptacles. It provides eight NEMA 5-15/20R and two NEMA L5-30R outlets for mixed plug types. AC-AC efficiency reaches 94 percent. Builders whose gear already runs on 208VAC or who need higher voltage output should look elsewhere.
5050VA capacity at 94 percent efficiency
The 5050VA rating and 94 percent AC-AC efficiency determine whether this transformer can handle the connected load without excessive loss. Input voltage acceptance covers 200, 208, 220, 230 and 240VAC. Output is fixed at 120VAC line-to-neutral. Verify that the total attached equipment stays within the 5050W limit.
Βασικά χαρακτηριστικά
- Converts 208/240 VAC input to 120 VAC output for compatible UPS systems
- Delivers 5050 VA and 5050 W continuous power for high-density rack loads
- Provides ten output receptacles: eight NEMA 5-15/20R plus two NEMA L5-30R
- Achieves 94 % AC-AC efficiency to reduce energy waste and heat
- Mounts in 2U rack or tower form factor with included hardware
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
How much heat and noise does the forced-air cooling add when the TDU runs continuously at 5050 VA?
The integrated forced airflow assists in keeping the rack cool while the unit delivers AC-AC efficiency of 94%, so only 6% of the 5050 W throughput becomes waste heat.
Which input plug and circuit must already be in place for the 208 VAC or 240 VAC feed?
The TDU accepts 208 VAC or 240 VAC (200/220/230 VAC acceptable) and requires a compatible input power plug matching the chosen UPS or mains source.
Will the NEMA 5-15/20R and L5-30R outlets power legacy 120 V servers alongside a Vertiv GXT3-6000RTL630 UPS?
Yes, the 10 output connections (8 NEMA 5-15/20R and 2 NEMA L5-30R) provide 120 VAC (L-N) and are designed to work with the GXT3-6000RTL630 and similar UPS units.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
