Black rectangular adapter with SATA and IDE connectors on one side, USB 3.0 cable attached, small power switch visible

WRIARICH

WRIARICH E01 SATA/IDE to USB 3.0 Hard Drive Adapter

SKU CH-5WVG-X0TA0

Connects 2.5 and 3.5 inch SATA or IDE drives and 5.25 inch optical drives to USB 3.0 at up to 5 Gbps with a 12 V 2 A power adapter and on/off switch

ColorBlack

Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
Access drives up to 6 TB capacity for backup or migration
Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
Protect drives using the built-in on/off power switch

26,99 $

0.000345 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 372,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Universal Hard Drive Adapter

The WRIARICH E01 connects 2.5" or 3.5" SATA and IDE drives plus 5.25" optical drives to a USB port. It suits technicians recovering archives, hobbyists repurposing legacy storage, and anyone moving large data sets between bare drives and a host computer.

Check drive power needs

SATA and 2.5" IDE units draw power from the USB bus. 3.5" IDE and older SATA drives require the included 12V 2A adapter and 4-pin cable. Remember to flip the on-board switch only after the power supply is connected.

Sustained transfer behaviour

The USB 3.0 link tops out at 5 Gbps, yet real-world throughput is capped by the attached drive's own limits. During long copy jobs the adapter maintains steady operation without thermal throttling, and the hardware switch lets you power down the drive between sessions.

Βασικά χαρακτηριστικά

Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
Access drives up to 6 TB capacity for backup or migration
Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
Protect drives using the built-in on/off power switch

Προδιαγραφές

Brand	WRIARICH
Model	E01
Color	Black

Ερωτήσεις για αυτό το προϊόν

What cables and power adapters come with the WRIARICH E01 and do I need anything else for a 3.5-inch IDE drive?

The package includes a 12V 2A power adapter and a 4-pin power cable. For a 3.5-inch IDE drive you must connect both and flip the on/off switch on the IDE adapter last.

The adapter lists 5 Gbps via USB 3.0 and up to 6 TB capacity — which figure matters for an older 2.5-inch SATA SSD?

The 6 TB ceiling is the limit the bridge can address; the 5 Gbps USB 3.0 link sets the maximum transfer rate, but the actual speed will be capped by the SSD itself.

How does the on/off switch protect a drive during everyday use with the E01?

The switch cuts power to the drive without unplugging the USB cable, letting you spin the disk down safely before removal and reducing wear on the connector.

Επίσης σε αυτό το ράφι