我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

WRIARICH

WRIARICH E01 SATA/IDE to USB 3.0 Hard Drive Adapter

SKU CH-5WVG-X0TA0

Connects 2.5 and 3.5 inch SATA or IDE drives and 5.25 inch optical drives to USB 3.0 at up to 5 Gbps with a 12 V 2 A power adapter and on/off switch

  • ColorBlack
  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
  • Access drives up to 6 TB capacity for backup or migration
  • Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
  • Protect drives using the built-in on/off power switch

Universal Hard Drive Adapter

The WRIARICH E01 connects 2.5" or 3.5" SATA and IDE drives plus 5.25" optical drives to a USB port. It suits technicians recovering archives, hobbyists repurposing legacy storage, and anyone moving large data sets between bare drives and a host computer.

Check drive power needs

SATA and 2.5" IDE units draw power from the USB bus. 3.5" IDE and older SATA drives require the included 12V 2A adapter and 4-pin cable. Remember to flip the on-board switch only after the power supply is connected.

Sustained transfer behaviour

The USB 3.0 link tops out at 5 Gbps, yet real-world throughput is capped by the attached drive's own limits. During long copy jobs the adapter maintains steady operation without thermal throttling, and the hardware switch lets you power down the drive between sessions.

商品特色

  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
  • Access drives up to 6 TB capacity for backup or migration
  • Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
  • Protect drives using the built-in on/off power switch

商品規格

BrandWRIARICH
ModelE01
ColorBlack

商品問答

What cables and power adapters come with the WRIARICH E01 and do I need anything else for a 3.5-inch IDE drive?

The package includes a 12V 2A power adapter and a 4-pin power cable. For a 3.5-inch IDE drive you must connect both and flip the on/off switch on the IDE adapter last.

The adapter lists 5 Gbps via USB 3.0 and up to 6 TB capacity — which figure matters for an older 2.5-inch SATA SSD?

The 6 TB ceiling is the limit the bridge can address; the 5 Gbps USB 3.0 link sets the maximum transfer rate, but the actual speed will be capped by the SSD itself.

How does the on/off switch protect a drive during everyday use with the E01?

The switch cuts power to the drive without unplugging the USB cable, letting you spin the disk down safely before removal and reducing wear on the connector.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。