Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black rectangular adapter with SATA and IDE connectors on one side, USB 3.0 cable attached, small power switch visible

WRIARICH

WRIARICH E01 SATA/IDE to USB 3.0 Hard Drive Adapter

SKU CH-5WVG-X0TA0

Connects 2.5 and 3.5 inch SATA or IDE drives and 5.25 inch optical drives to USB 3.0 at up to 5 Gbps with a 12 V 2 A power adapter and on/off switch

  • ColorBlack
  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
  • Access drives up to 6 TB capacity for backup or migration
  • Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
  • Protect drives using the built-in on/off power switch

Universal Hard Drive Adapter

The WRIARICH E01 connects 2.5" or 3.5" SATA and IDE drives plus 5.25" optical drives to a USB port. It suits technicians recovering archives, hobbyists repurposing legacy storage, and anyone moving large data sets between bare drives and a host computer.

Check drive power needs

SATA and 2.5" IDE units draw power from the USB bus. 3.5" IDE and older SATA drives require the included 12V 2A adapter and 4-pin cable. Remember to flip the on-board switch only after the power supply is connected.

Sustained transfer behaviour

The USB 3.0 link tops out at 5 Gbps, yet real-world throughput is capped by the attached drive's own limits. During long copy jobs the adapter maintains steady operation without thermal throttling, and the hardware switch lets you power down the drive between sessions.

Puncte forte

  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
  • Access drives up to 6 TB capacity for backup or migration
  • Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
  • Protect drives using the built-in on/off power switch

Specificații

BrandWRIARICH
ModelE01
ColorBlack

Întrebări despre acest articol

What cables and power adapters come with the WRIARICH E01 and do I need anything else for a 3.5-inch IDE drive?

The package includes a 12V 2A power adapter and a 4-pin power cable. For a 3.5-inch IDE drive you must connect both and flip the on/off switch on the IDE adapter last.

The adapter lists 5 Gbps via USB 3.0 and up to 6 TB capacity — which figure matters for an older 2.5-inch SATA SSD?

The 6 TB ceiling is the limit the bridge can address; the 5 Gbps USB 3.0 link sets the maximum transfer rate, but the actual speed will be capped by the SSD itself.

How does the on/off switch protect a drive during everyday use with the E01?

The switch cuts power to the drive without unplugging the USB cable, letting you spin the disk down safely before removal and reducing wear on the connector.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.