We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter with SATA and IDE connectors on one side, USB 3.0 cable attached, small power switch visible

WRIARICH

WRIARICH E01 SATA/IDE to USB 3.0 Hard Drive Adapter

SKU CH-5WVG-X0TA0

Connects 2.5 and 3.5 inch SATA or IDE drives and 5.25 inch optical drives to USB 3.0 at up to 5 Gbps with a 12 V 2 A power adapter and on/off switch

  • ColorBlack
  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
  • Access drives up to 6 TB capacity for backup or migration
  • Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
  • Protect drives using the built-in on/off power switch

Universal Hard Drive Adapter

The WRIARICH E01 connects 2.5" or 3.5" SATA and IDE drives plus 5.25" optical drives to a USB port. It suits technicians recovering archives, hobbyists repurposing legacy storage, and anyone moving large data sets between bare drives and a host computer.

Check drive power needs

SATA and 2.5" IDE units draw power from the USB bus. 3.5" IDE and older SATA drives require the included 12V 2A adapter and 4-pin cable. Remember to flip the on-board switch only after the power supply is connected.

Sustained transfer behaviour

The USB 3.0 link tops out at 5 Gbps, yet real-world throughput is capped by the attached drive's own limits. During long copy jobs the adapter maintains steady operation without thermal throttling, and the hardware switch lets you power down the drive between sessions.

Highlights

  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 backward compatible to 2.0 and 1.1
  • Access drives up to 6 TB capacity for backup or migration
  • Power 3.5 inch drives with included 12V 2A adapter and 4-pin cable
  • Protect drives using the built-in on/off power switch

Specifications

BrandWRIARICH
ModelE01
ColorBlack

Questions about this item

What cables and power adapters come with the WRIARICH E01 and do I need anything else for a 3.5-inch IDE drive?

The package includes a 12V 2A power adapter and a 4-pin power cable. For a 3.5-inch IDE drive you must connect both and flip the on/off switch on the IDE adapter last.

The adapter lists 5 Gbps via USB 3.0 and up to 6 TB capacity — which figure matters for an older 2.5-inch SATA SSD?

The 6 TB ceiling is the limit the bridge can address; the 5 Gbps USB 3.0 link sets the maximum transfer rate, but the actual speed will be capped by the SSD itself.

How does the on/off switch protect a drive during everyday use with the E01?

The switch cuts power to the drive without unplugging the USB cable, letting you spin the disk down safely before removal and reducing wear on the connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.