Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Small rectangular Xerox wireless upgrade kit module in white plastic finish

XEROX

XEROX 497K24370 Wireless Kit MFP upgrade

SKU CH-G38E-RJFNC MPN 497K24370

Adds wireless connectivity to compatible AltaLink multifunction printers

  • Wireless printing enabled for AltaLink B8145, B8155, B8170, C8130, C8135, C8145, C8155, C8170
  • MFP upgrade kit adds Wi-Fi capability without replacing the printer
  • Xerox genuine accessory ensures compatibility with listed AltaLink models
  • Manufactured in the United States for consistent quality
  • Simple installation upgrades existing multifunction printers to wireless operation

Xerox Wireless Kit for AltaLink MFPs

The Xerox 497K24370 Wireless Kit adds Wi-Fi capability to compatible AltaLink multifunction printers. It is designed for offices that want to place devices away from wired network points. Installation upgrades the MFP so users can print and scan from mobile devices or laptops without a physical cable. The kit supports the B8145, B8155, B8170, C8130, C8135, C8145, C8155 and C8170 series.

Plug-in module installs inside the device

The upgrade kit fits into an internal slot on the target AltaLink models, so no external dongles or cabling are required. Once fitted, the MFP broadcasts its own wireless network for direct connections or joins an existing infrastructure. The internal mounting keeps the antenna protected and the workspace tidy. Buyers who need a USB or Ethernet wireless adapter instead will not be served by this internal module.

No additional power draw or noise impact

The module draws power from the MFP's own supply, adding no measurable load to the office circuit. It has no moving parts, so acoustic output remains unchanged from the printer's normal operation. Heat generation is negligible and requires no extra cooling consideration. Environments that demand a separate wireless access point with dedicated power and antennas are outside this kit's scope.

Βασικά χαρακτηριστικά

  • Wireless printing enabled for AltaLink B8145, B8155, B8170, C8130, C8135, C8145, C8155, C8170
  • MFP upgrade kit adds Wi-Fi capability without replacing the printer
  • Xerox genuine accessory ensures compatibility with listed AltaLink models
  • Manufactured in the United States for consistent quality
  • Simple installation upgrades existing multifunction printers to wireless operation

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

What wireless standard does the Xerox 497K24370 kit add to the AltaLink C8145/H2?

The kit enables Wi-Fi connectivity for the listed AltaLink printers, allowing them to join a wireless network for printing and scanning without a wired Ethernet link.

Which slot or compartment does the Xerox 497K24370 module occupy inside an AltaLink B8155/H2?

The upgrade kit installs into the dedicated wireless adapter bay on the formatter board of the compatible AltaLink models.

What is the correct sequence to install the Xerox 497K24370 kit on an AltaLink C8130/T2?

Power off the printer, open the formatter cover, insert the wireless module into the adapter bay until it clicks, close the cover, power on, then configure the wireless settings from the control panel.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.