暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular Xerox wireless upgrade kit module in white plastic finish

XEROX

XEROX 497K24370 Wireless Kit MFP upgrade

SKU CH-G38E-RJFNC MPN 497K24370

Adds wireless connectivity to compatible AltaLink multifunction printers

  • Wireless printing enabled for AltaLink B8145, B8155, B8170, C8130, C8135, C8145, C8155, C8170
  • MFP upgrade kit adds Wi-Fi capability without replacing the printer
  • Xerox genuine accessory ensures compatibility with listed AltaLink models
  • Manufactured in the United States for consistent quality
  • Simple installation upgrades existing multifunction printers to wireless operation

Xerox Wireless Kit for AltaLink MFPs

The Xerox 497K24370 Wireless Kit adds Wi-Fi capability to compatible AltaLink multifunction printers. It is designed for offices that want to place devices away from wired network points. Installation upgrades the MFP so users can print and scan from mobile devices or laptops without a physical cable. The kit supports the B8145, B8155, B8170, C8130, C8135, C8145, C8155 and C8170 series.

Plug-in module installs inside the device

The upgrade kit fits into an internal slot on the target AltaLink models, so no external dongles or cabling are required. Once fitted, the MFP broadcasts its own wireless network for direct connections or joins an existing infrastructure. The internal mounting keeps the antenna protected and the workspace tidy. Buyers who need a USB or Ethernet wireless adapter instead will not be served by this internal module.

No additional power draw or noise impact

The module draws power from the MFP's own supply, adding no measurable load to the office circuit. It has no moving parts, so acoustic output remains unchanged from the printer's normal operation. Heat generation is negligible and requires no extra cooling consideration. Environments that demand a separate wireless access point with dedicated power and antennas are outside this kit's scope.

特長

  • Wireless printing enabled for AltaLink B8145, B8155, B8170, C8130, C8135, C8145, C8155, C8170
  • MFP upgrade kit adds Wi-Fi capability without replacing the printer
  • Xerox genuine accessory ensures compatibility with listed AltaLink models
  • Manufactured in the United States for consistent quality
  • Simple installation upgrades existing multifunction printers to wireless operation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What wireless standard does the Xerox 497K24370 kit add to the AltaLink C8145/H2?

The kit enables Wi-Fi connectivity for the listed AltaLink printers, allowing them to join a wireless network for printing and scanning without a wired Ethernet link.

Which slot or compartment does the Xerox 497K24370 module occupy inside an AltaLink B8155/H2?

The upgrade kit installs into the dedicated wireless adapter bay on the formatter board of the compatible AltaLink models.

What is the correct sequence to install the Xerox 497K24370 kit on an AltaLink C8130/T2?

Power off the printer, open the formatter cover, insert the wireless module into the adapter bay until it clicks, close the cover, power on, then configure the wireless settings from the control panel.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。