BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278211BTC
Laos
A-Tech
A-Tech 4GB DDR4 2133MHz CL15 1.2V Dell A8058283 A8423727 SNP61H6HC/4G Desktop RAM
4GB DDR4 2133MHz CL15 desktop DIMM module for Dell A8058283, A8423727 and SNP61H6HC/4G systems
- Capacity4GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 4GB capacity adds headroom for everyday multitasking
- DDR4 2133MHz speed matches PC4-17000 system specs
- CL15 latency at 1.2V standard voltage
- 288-pin unbuffered DIMM fits Dell A8058283 A8423727 SNP61H6HC/4G
- Tested with major-brand chips for dependable operation
4GB DDR4 2133MHz Desktop DIMM
This A-Tech module provides 4GB of DDR4 memory at 2133MHz with CL15 latency. It uses the standard 288-pin DIMM form factor and operates at 1.2V. The kit is an unbuffered, non-ECC design built with major brand chips for desktop systems.
Suitable for Dell A8058283 A8423727 SNP61H6HC/4G
This module matches the Dell part numbers A8058283, A8423727 and SNP61H6HC/4G. It works with AMD and Intel platforms that accept DDR4 2133MHz UDIMMs. Users needing ECC, registered memory, higher capacities or faster speeds should select a different module.
Verify your motherboard supports DDR4 2133MHz UDIMM
Check that your board accepts 288-pin DDR4 DIMMs at 1.2V and non-ECC unbuffered operation. Confirm the maximum memory per slot and total capacity allowed. Ensure an empty DIMM slot is available for this single 4GB stick.
Põhijooned
- 4GB capacity adds headroom for everyday multitasking
- DDR4 2133MHz speed matches PC4-17000 system specs
- CL15 latency at 1.2V standard voltage
- 288-pin unbuffered DIMM fits Dell A8058283 A8423727 SNP61H6HC/4G
- Tested with major-brand chips for dependable operation
Tehnilised andmed
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Küsimused selle toote kohta
What motherboard slot does the 288-pin DDR4 DIMM need?
The module fits a standard DDR4 DIMM slot on a desktop motherboard that supports 2133 MHz operation at 1.2 V.
Will the CL15 2133 MHz stick run with slower DDR4 modules already installed?
Yes, the memory will down-clock to match the lowest speed and highest latency of the existing modules.
How can I confirm the 4 GB module is recognised at 2133 MHz after installation?
Check the BIOS memory information or use a system utility such as CPU-Z to verify the reported speed and capacity.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
