Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 4GB DDR4 2133MHz CL15 1.2V Dell A8058283 A8423727 SNP61H6HC/4G Desktop RAM

SKU CH-4YGN-N43P5

4GB DDR4 2133MHz CL15 desktop DIMM module for Dell A8058283, A8423727 and SNP61H6HC/4G systems

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2133MHz speed matches PC4-17000 system specs
  • CL15 latency at 1.2V standard voltage
  • 288-pin unbuffered DIMM fits Dell A8058283 A8423727 SNP61H6HC/4G
  • Tested with major-brand chips for dependable operation

4GB DDR4 2133MHz Desktop DIMM

This A-Tech module provides 4GB of DDR4 memory at 2133MHz with CL15 latency. It uses the standard 288-pin DIMM form factor and operates at 1.2V. The kit is an unbuffered, non-ECC design built with major brand chips for desktop systems.

Suitable for Dell A8058283 A8423727 SNP61H6HC/4G

This module matches the Dell part numbers A8058283, A8423727 and SNP61H6HC/4G. It works with AMD and Intel platforms that accept DDR4 2133MHz UDIMMs. Users needing ECC, registered memory, higher capacities or faster speeds should select a different module.

Verify your motherboard supports DDR4 2133MHz UDIMM

Check that your board accepts 288-pin DDR4 DIMMs at 1.2V and non-ECC unbuffered operation. Confirm the maximum memory per slot and total capacity allowed. Ensure an empty DIMM slot is available for this single 4GB stick.

Kohokohdat

  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2133MHz speed matches PC4-17000 system specs
  • CL15 latency at 1.2V standard voltage
  • 288-pin unbuffered DIMM fits Dell A8058283 A8423727 SNP61H6HC/4G
  • Tested with major-brand chips for dependable operation

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

What motherboard slot does the 288-pin DDR4 DIMM need?

The module fits a standard DDR4 DIMM slot on a desktop motherboard that supports 2133 MHz operation at 1.2 V.

Will the CL15 2133 MHz stick run with slower DDR4 modules already installed?

Yes, the memory will down-clock to match the lowest speed and highest latency of the existing modules.

How can I confirm the 4 GB module is recognised at 2133 MHz after installation?

Check the BIOS memory information or use a system utility such as CPU-Z to verify the reported speed and capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.