BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
4GB DDR4 2133MHz CL15 desktop DIMM module for Dell A8058283, A8423727 and SNP61H6HC/4G systems
This A-Tech module provides 4GB of DDR4 memory at 2133MHz with CL15 latency. It uses the standard 288-pin DIMM form factor and operates at 1.2V. The kit is an unbuffered, non-ECC design built with major brand chips for desktop systems.
This module matches the Dell part numbers A8058283, A8423727 and SNP61H6HC/4G. It works with AMD and Intel platforms that accept DDR4 2133MHz UDIMMs. Users needing ECC, registered memory, higher capacities or faster speeds should select a different module.
Check that your board accepts 288-pin DDR4 DIMMs at 1.2V and non-ECC unbuffered operation. Confirm the maximum memory per slot and total capacity allowed. Ensure an empty DIMM slot is available for this single 4GB stick.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
The module fits a standard DDR4 DIMM slot on a desktop motherboard that supports 2133 MHz operation at 1.2 V.
Yes, the memory will down-clock to match the lowest speed and highest latency of the existing modules.
Check the BIOS memory information or use a system utility such as CPU-Z to verify the reported speed and capacity.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?