Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

A-Tech

A-Tech 4GB DDR4 2133MHz CL15 1.2V Dell A8058283 A8423727 SNP61H6HC/4G Desktop RAM

SKU CH-4YGN-N43P5

4GB DDR4 2133MHz CL15 desktop DIMM module for Dell A8058283, A8423727 and SNP61H6HC/4G systems

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2133MHz speed matches PC4-17000 system specs
  • CL15 latency at 1.2V standard voltage
  • 288-pin unbuffered DIMM fits Dell A8058283 A8423727 SNP61H6HC/4G
  • Tested with major-brand chips for dependable operation

4GB DDR4 2133MHz Desktop DIMM

This A-Tech module provides 4GB of DDR4 memory at 2133MHz with CL15 latency. It uses the standard 288-pin DIMM form factor and operates at 1.2V. The kit is an unbuffered, non-ECC design built with major brand chips for desktop systems.

Suitable for Dell A8058283 A8423727 SNP61H6HC/4G

This module matches the Dell part numbers A8058283, A8423727 and SNP61H6HC/4G. It works with AMD and Intel platforms that accept DDR4 2133MHz UDIMMs. Users needing ECC, registered memory, higher capacities or faster speeds should select a different module.

Verify your motherboard supports DDR4 2133MHz UDIMM

Check that your board accepts 288-pin DDR4 DIMMs at 1.2V and non-ECC unbuffered operation. Confirm the maximum memory per slot and total capacity allowed. Ensure an empty DIMM slot is available for this single 4GB stick.

Erősségek

  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2133MHz speed matches PC4-17000 system specs
  • CL15 latency at 1.2V standard voltage
  • 288-pin unbuffered DIMM fits Dell A8058283 A8423727 SNP61H6HC/4G
  • Tested with major-brand chips for dependable operation

Műszaki adatok

BrandA-Tech
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kérdések a termékről

What motherboard slot does the 288-pin DDR4 DIMM need?

The module fits a standard DDR4 DIMM slot on a desktop motherboard that supports 2133 MHz operation at 1.2 V.

Will the CL15 2133 MHz stick run with slower DDR4 modules already installed?

Yes, the memory will down-clock to match the lowest speed and highest latency of the existing modules.

How can I confirm the 4 GB module is recognised at 2133 MHz after installation?

Check the BIOS memory information or use a system utility such as CPU-Z to verify the reported speed and capacity.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.