Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two black DDR5 memory sticks with RGB lighting and finned heatsinks

AGI

AGI AGI7APC16UD858 TURBLEJET 32GB DDR5 7200 CL34 RGB desktop RAM

SKU CH-WP0E-JRRDD MPN AGI7APC16UD858

A 32 GB DDR5 kit running at 7200 MT/s with CL34 latency, on-die ECC and programmable RGB lighting

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 7200 (PC5 57600)
  • CAS LatencyCL34
  • ECCYes
  • ColorBlack

Speed DDR5 7200 (PC5 57600)

CAS Latency CL34

  • 32 GB dual-channel kit for high-capacity multitasking
  • 7200 MT/s DDR5 speed for responsive data throughput
  • CL34 latency at 1.4 V for efficient timing
  • On-die ECC with PMIC for data integrity
  • Programmable RGB lighting on black heatsink for customisable aesthetics

Capacity and platform fit

This AGI TURBLEJET kit delivers 32 GB of DDR5 memory in two 16 GB modules rated at 7200 MT/s with CL34 latency. It targets enthusiasts and workstation users who want high throughput plus on-die ECC for data integrity. Intel XMP 3.0 and AMD EXPO profiles are both supported for one-click overclocking.

Motherboard and power check

Verify that your board has four 288-pin DDR5 slots and can run memory at 1.4 V before ordering. The kit requires a platform that implements Intel XMP 3.0 or AMD EXPO to reach the advertised 7200 MT/s; otherwise it will fall back to standard JEDEC speeds. Ensure your CPU memory controller is validated for this frequency.

Heat spreader and lighting daily use

A black anodised heat spreader covers each module to improve thermal dissipation during sustained loads. Addressable RGB LEDs run along the top edge and can be synchronised through common motherboard lighting software. The built-in power management IC handles voltage regulation on the module itself, reducing the burden on the motherboard power phase.

Põhijooned

  • 32 GB dual-channel kit for high-capacity multitasking
  • 7200 MT/s DDR5 speed for responsive data throughput
  • CL34 latency at 1.4 V for efficient timing
  • On-die ECC with PMIC for data integrity
  • Programmable RGB lighting on black heatsink for customisable aesthetics

Tehnilised andmed

BrandAGI
SeriesTURBLEJET
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 7200 (PC5 57600)
CAS LatencyCL34
ECCYes
ColorBlack
LED ColorRGB

Selle mudeli teised versioonid

2 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will the 1.4 V operating voltage work with my DDR5 motherboard?

DDR5 modules run at 1.4 V when the XMP 3.0 or EXPO profile is enabled; the board must support that voltage for the 7200 MT/s speed.

Does the 32 GB kit (2 × 16 GB) fit a standard 288-pin desktop slot?

Yes, each module uses the standard 288-pin DDR5 form factor and installs in regular desktop DIMM slots.

What does the CL34 latency mean for real-world use?

CL34 at 7200 MT/s gives low cycle latency, so the kit responds quickly in gaming and multitasking workloads.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.