AGI AGI6JPC16UD858 32GB (2x16GB) DDR5 6800 CL34 ECC RGB desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
AGI
A 32 GB DDR5 kit running at 7200 MT/s with CL34 latency, on-die ECC and programmable RGB lighting
Speed DDR5 7200 (PC5 57600)
CAS Latency CL34
This AGI TURBLEJET kit delivers 32 GB of DDR5 memory in two 16 GB modules rated at 7200 MT/s with CL34 latency. It targets enthusiasts and workstation users who want high throughput plus on-die ECC for data integrity. Intel XMP 3.0 and AMD EXPO profiles are both supported for one-click overclocking.
Verify that your board has four 288-pin DDR5 slots and can run memory at 1.4 V before ordering. The kit requires a platform that implements Intel XMP 3.0 or AMD EXPO to reach the advertised 7200 MT/s; otherwise it will fall back to standard JEDEC speeds. Ensure your CPU memory controller is validated for this frequency.
A black anodised heat spreader covers each module to improve thermal dissipation during sustained loads. Addressable RGB LEDs run along the top edge and can be synchronised through common motherboard lighting software. The built-in power management IC handles voltage regulation on the module itself, reducing the burden on the motherboard power phase.
| Brand | AGI |
|---|---|
| Series | TURBLEJET |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 7200 (PC5 57600) |
| CAS Latency | CL34 |
| ECC | Yes |
| Color | Black |
| LED Color | RGB |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
DDR5 modules run at 1.4 V when the XMP 3.0 or EXPO profile is enabled; the board must support that voltage for the 7200 MT/s speed.
Yes, each module uses the standard 288-pin DDR5 form factor and installs in regular desktop DIMM slots.
CL34 at 7200 MT/s gives low cycle latency, so the kit responds quickly in gaming and multitasking workloads.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?