AGI AGI6JPC16UD858 32GB (2x16GB) DDR5 6800 CL34 ECC RGB desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
AGI
A 32 GB DDR5 kit running at 7200 MT/s with CL34 latency, on-die ECC and programmable RGB lighting
Speed DDR5 7200 (PC5 57600)
CAS Latency CL34
This AGI TURBLEJET kit delivers 32 GB of DDR5 memory in two 16 GB modules rated at 7200 MT/s with CL34 latency. It targets enthusiasts and workstation users who want high throughput plus on-die ECC for data integrity. Intel XMP 3.0 and AMD EXPO profiles are both supported for one-click overclocking.
Verify that your board has four 288-pin DDR5 slots and can run memory at 1.4 V before ordering. The kit requires a platform that implements Intel XMP 3.0 or AMD EXPO to reach the advertised 7200 MT/s; otherwise it will fall back to standard JEDEC speeds. Ensure your CPU memory controller is validated for this frequency.
A black anodised heat spreader covers each module to improve thermal dissipation during sustained loads. Addressable RGB LEDs run along the top edge and can be synchronised through common motherboard lighting software. The built-in power management IC handles voltage regulation on the module itself, reducing the burden on the motherboard power phase.
| Brand | AGI |
|---|---|
| Series | TURBLEJET |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 7200 (PC5 57600) |
| CAS Latency | CL34 |
| ECC | Yes |
| Color | Black |
| LED Color | RGB |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
DDR5 modules run at 1.4 V when the XMP 3.0 or EXPO profile is enabled; the board must support that voltage for the 7200 MT/s speed.
Yes, each module uses the standard 288-pin DDR5 form factor and installs in regular desktop DIMM slots.
CL34 at 7200 MT/s gives low cycle latency, so the kit responds quickly in gaming and multitasking workloads.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?