AGI AGI6JPC16UD858 32GB (2x16GB) DDR5 6800 CL34 ECC RGB desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
AGI
A 32 GB DDR5 kit running at 7200 MT/s with CL34 latency, on-die ECC and programmable RGB lighting
Speed DDR5 7200 (PC5 57600)
CAS Latency CL34
This AGI TURBLEJET kit delivers 32 GB of DDR5 memory in two 16 GB modules rated at 7200 MT/s with CL34 latency. It targets enthusiasts and workstation users who want high throughput plus on-die ECC for data integrity. Intel XMP 3.0 and AMD EXPO profiles are both supported for one-click overclocking.
Verify that your board has four 288-pin DDR5 slots and can run memory at 1.4 V before ordering. The kit requires a platform that implements Intel XMP 3.0 or AMD EXPO to reach the advertised 7200 MT/s; otherwise it will fall back to standard JEDEC speeds. Ensure your CPU memory controller is validated for this frequency.
A black anodised heat spreader covers each module to improve thermal dissipation during sustained loads. Addressable RGB LEDs run along the top edge and can be synchronised through common motherboard lighting software. The built-in power management IC handles voltage regulation on the module itself, reducing the burden on the motherboard power phase.
| Brand | AGI |
|---|---|
| Series | TURBLEJET |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 7200 (PC5 57600) |
| CAS Latency | CL34 |
| ECC | Yes |
| Color | Black |
| LED Color | RGB |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
DDR5 modules run at 1.4 V when the XMP 3.0 or EXPO profile is enabled; the board must support that voltage for the 7200 MT/s speed.
Yes, each module uses the standard 288-pin DDR5 form factor and installs in regular desktop DIMM slots.
CL34 at 7200 MT/s gives low cycle latency, so the kit responds quickly in gaming and multitasking workloads.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?