Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular silver ASIC miner with integrated PSU, 400 by 195 by 290 mm, 14.20 kg

Antminer

Antminer S19 86TH/s mining hardware

SKU CH-FDJD-57BDK

Bitcoin ASIC miner delivering 86 TH/s at 3250 W with included PSU in a 400×195×290 mm, 14.20 kg chassis requiring 220 V input

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Antminer S19 86TH/s Bitcoin Miner

This Antminer S19 is an ASIC miner rated at 86 TH/s for Bitcoin mining. It draws 3250 W and ships with a power supply included so it can start hashing immediately. The unit measures 400×195×290 mm and weighs 14.20 kg.

Suitable for 220 V operations only

This hardware suits operators with access to a 220 V supply and the cooling capacity for 3250 W of continuous heat. Buyers without a 220 V circuit or adequate ventilation should look elsewhere. The 365-day warranty covers defects but does not remove the need for correct voltage and airflow.

Power efficiency 34.5 J/T

The decisive specification is the power ratio of 34.5 J/T, which determines electricity cost per terahash. At this efficiency the miner consumes roughly 3250 W at the rated 86 TH/s. Verify your electricity rate against this figure before purchasing.

Põhijooned

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

Will the Antminer S19 86TH/s run on my existing 220 V circuit without extra wiring?

The unit requires a 220 V supply and draws 3250 W, so the circuit and outlet must be rated for that load.

How can I confirm the miner is delivering the rated 86 TH/s once it is powered up?

Check the dashboard for a stable hashrate near 86 TH/s and a power ratio around 34.5 J/T.

Does the box contain the PSU and all cables, or do I need to buy a separate power supply?

A PSU is included in the 400×195×290 mm, 14.20 kg package; no extra power supply is needed.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.