Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver ASIC miner with integrated PSU, 400 by 195 by 290 mm, 14.20 kg

Antminer

Antminer S19 86TH/s mining hardware

SKU CH-FDJD-57BDK

Bitcoin ASIC miner delivering 86 TH/s at 3250 W with included PSU in a 400×195×290 mm, 14.20 kg chassis requiring 220 V input

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Antminer S19 86TH/s Bitcoin Miner

This Antminer S19 is an ASIC miner rated at 86 TH/s for Bitcoin mining. It draws 3250 W and ships with a power supply included so it can start hashing immediately. The unit measures 400×195×290 mm and weighs 14.20 kg.

Suitable for 220 V operations only

This hardware suits operators with access to a 220 V supply and the cooling capacity for 3250 W of continuous heat. Buyers without a 220 V circuit or adequate ventilation should look elsewhere. The 365-day warranty covers defects but does not remove the need for correct voltage and airflow.

Power efficiency 34.5 J/T

The decisive specification is the power ratio of 34.5 J/T, which determines electricity cost per terahash. At this efficiency the miner consumes roughly 3250 W at the rated 86 TH/s. Verify your electricity rate against this figure before purchasing.

Pluspunten

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Will the Antminer S19 86TH/s run on my existing 220 V circuit without extra wiring?

The unit requires a 220 V supply and draws 3250 W, so the circuit and outlet must be rated for that load.

How can I confirm the miner is delivering the rated 86 TH/s once it is powered up?

Check the dashboard for a stable hashrate near 86 TH/s and a power ratio around 34.5 J/T.

Does the box contain the PSU and all cables, or do I need to buy a separate power supply?

A PSU is included in the 400×195×290 mm, 14.20 kg package; no extra power supply is needed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.