Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular silver ASIC miner with integrated PSU, 400 by 195 by 290 mm, 14.20 kg

Antminer

Antminer S19 86TH/s mining hardware

SKU CH-FDJD-57BDK

Bitcoin ASIC miner delivering 86 TH/s at 3250 W with included PSU in a 400×195×290 mm, 14.20 kg chassis requiring 220 V input

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Antminer S19 86TH/s Bitcoin Miner

This Antminer S19 is an ASIC miner rated at 86 TH/s for Bitcoin mining. It draws 3250 W and ships with a power supply included so it can start hashing immediately. The unit measures 400×195×290 mm and weighs 14.20 kg.

Suitable for 220 V operations only

This hardware suits operators with access to a 220 V supply and the cooling capacity for 3250 W of continuous heat. Buyers without a 220 V circuit or adequate ventilation should look elsewhere. The 365-day warranty covers defects but does not remove the need for correct voltage and airflow.

Power efficiency 34.5 J/T

The decisive specification is the power ratio of 34.5 J/T, which determines electricity cost per terahash. At this efficiency the miner consumes roughly 3250 W at the rated 86 TH/s. Verify your electricity rate against this figure before purchasing.

I korthet

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Will the Antminer S19 86TH/s run on my existing 220 V circuit without extra wiring?

The unit requires a 220 V supply and draws 3250 W, so the circuit and outlet must be rated for that load.

How can I confirm the miner is delivering the rated 86 TH/s once it is powered up?

Check the dashboard for a stable hashrate near 86 TH/s and a power ratio around 34.5 J/T.

Does the box contain the PSU and all cables, or do I need to buy a separate power supply?

A PSU is included in the 400×195×290 mm, 14.20 kg package; no extra power supply is needed.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.