Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular silver ASIC miner with integrated PSU, 400 by 195 by 290 mm, 14.20 kg

Antminer

Antminer S19 86TH/s mining hardware

SKU CH-FDJD-57BDK

Bitcoin ASIC miner delivering 86 TH/s at 3250 W with included PSU in a 400×195×290 mm, 14.20 kg chassis requiring 220 V input

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Antminer S19 86TH/s Bitcoin Miner

This Antminer S19 is an ASIC miner rated at 86 TH/s for Bitcoin mining. It draws 3250 W and ships with a power supply included so it can start hashing immediately. The unit measures 400×195×290 mm and weighs 14.20 kg.

Suitable for 220 V operations only

This hardware suits operators with access to a 220 V supply and the cooling capacity for 3250 W of continuous heat. Buyers without a 220 V circuit or adequate ventilation should look elsewhere. The 365-day warranty covers defects but does not remove the need for correct voltage and airflow.

Power efficiency 34.5 J/T

The decisive specification is the power ratio of 34.5 J/T, which determines electricity cost per terahash. At this efficiency the miner consumes roughly 3250 W at the rated 86 TH/s. Verify your electricity rate against this figure before purchasing.

Istaknuto

  • 86 TH/s hash rate for high Bitcoin mining throughput
  • 3250 W power draw at 34.5 J/TH efficiency
  • PSU included so the unit runs straight from the box
  • 220 V input requirement matches standard industrial supply
  • 365-day manufacturer warranty covers the new hardware

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Pitanja o ovom artiklu

Will the Antminer S19 86TH/s run on my existing 220 V circuit without extra wiring?

The unit requires a 220 V supply and draws 3250 W, so the circuit and outlet must be rated for that load.

How can I confirm the miner is delivering the rated 86 TH/s once it is powered up?

Check the dashboard for a stable hashrate near 86 TH/s and a power ratio around 34.5 J/T.

Does the box contain the PSU and all cables, or do I need to buy a separate power supply?

A PSU is included in the 400×195×290 mm, 14.20 kg package; no extra power supply is needed.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.