Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

DELL

DELL 400-AIXX 1.8TB 2.5" SAS 10K 12Gb/s Non Hot-Swap internal hard drive

SKU CH-970T-MFM2X

1.8 TB 2.5-inch SAS drive spins at 10 000 RPM with a 12 Gb/s interface for fast nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense drive bays
  • Non hot-swap design suits fixed internal installations

Capacity and interface

The Dell 400-AIXX is a 1.8TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface. It suits servers or workstations that need fast sequential access in a small form factor.

Build and mounting

The bare drive uses a standard SAS connector and is designated non hot-swap, so it must be installed with the system powered down. Retail or OEM packaging may vary and no tray is included.

Upgrade context

It replaces slower 7.2K nearline SAS drives when higher IOPS are required for databases or virtualisation workloads. The jump is worth it when the workload is latency sensitive and the chassis accepts 2.5" non hot-swap bays.

Põhijooned

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense drive bays
  • Non hot-swap design suits fixed internal installations

Tehnilised andmed

BrandDell
Model400-AIXX
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor2.5"

Küsimused selle toote kohta

What practical throughput limit does the SAS 12Gb/s interface impose on this 1.8TB drive?

The 12Gb/s SAS link caps the drive at 12Gb/s, so real-world throughput will not exceed that interface ceiling.

Which drive bay size and mounting style does the 2.5" non hot-swap form factor require?

It fits a standard 2.5" internal bay and must be screwed into a fixed caddy or tray because it lacks a hot-swap carrier.

How is this non hot-swap drive installed, and what step do builders often miss?

Power down the system, mount the bare drive in a 2.5" caddy with screws, attach both SAS data and power cables, then configure the RAID controller before booting.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.