我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 2.5 inch SAS hard drive bare unit

DELL

DELL 400-AIXX 1.8TB 2.5" SAS 10K 12Gb/s Non Hot-Swap internal hard drive

SKU CH-970T-MFM2X

1.8 TB 2.5-inch SAS drive spins at 10 000 RPM with a 12 Gb/s interface for fast nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense drive bays
  • Non hot-swap design suits fixed internal installations

Capacity and interface

The Dell 400-AIXX is a 1.8TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface. It suits servers or workstations that need fast sequential access in a small form factor.

Build and mounting

The bare drive uses a standard SAS connector and is designated non hot-swap, so it must be installed with the system powered down. Retail or OEM packaging may vary and no tray is included.

Upgrade context

It replaces slower 7.2K nearline SAS drives when higher IOPS are required for databases or virtualisation workloads. The jump is worth it when the workload is latency sensitive and the chassis accepts 2.5" non hot-swap bays.

商品特色

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense drive bays
  • Non hot-swap design suits fixed internal installations

商品規格

BrandDell
Model400-AIXX
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor2.5"

商品問答

What practical throughput limit does the SAS 12Gb/s interface impose on this 1.8TB drive?

The 12Gb/s SAS link caps the drive at 12Gb/s, so real-world throughput will not exceed that interface ceiling.

Which drive bay size and mounting style does the 2.5" non hot-swap form factor require?

It fits a standard 2.5" internal bay and must be screwed into a fixed caddy or tray because it lacks a hot-swap carrier.

How is this non hot-swap drive installed, and what step do builders often miss?

Power down the system, mount the bare drive in a 2.5" caddy with screws, attach both SAS data and power cables, then configure the RAID controller before booting.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。