暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive bare unit

DELL

DELL 400-AIXX 1.8TB 2.5" SAS 10K 12Gb/s Non Hot-Swap internal hard drive

SKU CH-970T-MFM2X

1.8 TB 2.5-inch SAS drive spins at 10 000 RPM with a 12 Gb/s interface for fast nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense drive bays
  • Non hot-swap design suits fixed internal installations

Capacity and interface

The Dell 400-AIXX is a 1.8TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface. It suits servers or workstations that need fast sequential access in a small form factor.

Build and mounting

The bare drive uses a standard SAS connector and is designated non hot-swap, so it must be installed with the system powered down. Retail or OEM packaging may vary and no tray is included.

Upgrade context

It replaces slower 7.2K nearline SAS drives when higher IOPS are required for databases or virtualisation workloads. The jump is worth it when the workload is latency sensitive and the chassis accepts 2.5" non hot-swap bays.

特長

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense drive bays
  • Non hot-swap design suits fixed internal installations

仕様

BrandDell
Model400-AIXX
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor2.5"

この商品に関する質問

What practical throughput limit does the SAS 12Gb/s interface impose on this 1.8TB drive?

The 12Gb/s SAS link caps the drive at 12Gb/s, so real-world throughput will not exceed that interface ceiling.

Which drive bay size and mounting style does the 2.5" non hot-swap form factor require?

It fits a standard 2.5" internal bay and must be screwed into a fixed caddy or tray because it lacks a hot-swap carrier.

How is this non hot-swap drive installed, and what step do builders often miss?

Power down the system, mount the bare drive in a 2.5" caddy with screws, attach both SAS data and power cables, then configure the RAID controller before booting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。