DELL
DELL ST3300555SS 300GB 15000RPM 3.5" SAS internal hard drive
300 GB 3.5-inch SAS drive spins at 15 000 RPM with 16 MB cache for fast server storage
- 300 GB capacity stores large datasets
- 15000 RPM spindle delivers fast data access
- SAS 3 Gb/s interface connects to enterprise controllers
- 16 MB cache buffers burst workloads
- 5 inch form factor fits standard drive bays
300GB 15000RPM SAS drive
The Dell ST3300555SS is a 300GB 3.5-inch internal hard drive spinning at 15000RPM with a SAS 3Gb/s interface and a 16MB cache. It is built for servers and workstations that need fast sequential access in a 3.5-inch form factor. The drive arrives new as a bare unit without brackets or cables.
Sustained throughput on SAS 3Gb/s
Under continuous load the 15000RPM spindle keeps sequential transfer rates steady across the 300GB capacity. The 16MB buffer absorbs burst requests while the SAS 3Gb/s link maintains consistent bandwidth during long write or read sessions. Performance scales with queue depth on compatible controllers.
Thermals and power in normal use
The 3.5-inch mechanism runs at typical enterprise temperatures when mounted with adequate airflow in a server chassis. Acoustic output is noticeable but expected for a 15000RPM spindle in rack environments. Power draw follows standard SAS 3Gb/s specifications for drives of this capacity and speed class.
Põhijooned
- 300 GB capacity stores large datasets
- 15000 RPM spindle delivers fast data access
- SAS 3 Gb/s interface connects to enterprise controllers
- 16 MB cache buffers burst workloads
- 5 inch form factor fits standard drive bays
Tehnilised andmed
Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.
Küsimused selle toote kohta
How much heat and noise should I expect from a 15000RPM SAS drive running continuously?
A 15000RPM spindle generates more heat and acoustic output than slower drives; ensure your chassis has adequate airflow over the 3.5" bays and plan for a higher thermal load during all-day operation.
What host interface and connector does the ST3300555SS require to function?
The drive uses a 3.5" SAS 3Gb/s interface, so the system must provide a compatible SAS backplane or controller with the correct power and data connectors for a bare 3.5" unit.
Can the ST3300555SS share a SAS controller with older 3Gb/s or slower SAS drives?
Yes, the 3Gb/s SAS link will negotiate down to match slower SAS devices on the same controller, allowing mixed-generation arrays to operate at each drive's rated speed.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
