Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 3.5 inch SAS hard drive bare unit

DELL

DELL ST3300555SS 300GB 15000RPM 3.5" SAS internal hard drive

SKU CH-8RRK-2CCS0

300 GB 3.5-inch SAS drive spins at 15 000 RPM with 16 MB cache for fast server storage

  • 300 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • SAS 3 Gb/s interface connects to enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits standard drive bays

300GB 15000RPM SAS drive

The Dell ST3300555SS is a 300GB 3.5-inch internal hard drive spinning at 15000RPM with a SAS 3Gb/s interface and a 16MB cache. It is built for servers and workstations that need fast sequential access in a 3.5-inch form factor. The drive arrives new as a bare unit without brackets or cables.

Sustained throughput on SAS 3Gb/s

Under continuous load the 15000RPM spindle keeps sequential transfer rates steady across the 300GB capacity. The 16MB buffer absorbs burst requests while the SAS 3Gb/s link maintains consistent bandwidth during long write or read sessions. Performance scales with queue depth on compatible controllers.

Thermals and power in normal use

The 3.5-inch mechanism runs at typical enterprise temperatures when mounted with adequate airflow in a server chassis. Acoustic output is noticeable but expected for a 15000RPM spindle in rack environments. Power draw follows standard SAS 3Gb/s specifications for drives of this capacity and speed class.

Helstu kostir

  • 300 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • SAS 3 Gb/s interface connects to enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits standard drive bays

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How much heat and noise should I expect from a 15000RPM SAS drive running continuously?

A 15000RPM spindle generates more heat and acoustic output than slower drives; ensure your chassis has adequate airflow over the 3.5" bays and plan for a higher thermal load during all-day operation.

What host interface and connector does the ST3300555SS require to function?

The drive uses a 3.5" SAS 3Gb/s interface, so the system must provide a compatible SAS backplane or controller with the correct power and data connectors for a bare 3.5" unit.

Can the ST3300555SS share a SAS controller with older 3Gb/s or slower SAS drives?

Yes, the 3Gb/s SAS link will negotiate down to match slower SAS devices on the same controller, allowing mixed-generation arrays to operate at each drive's rated speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.