Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5 inch SAS hard drive bare unit

DELL

DELL ST3300555SS 300GB 15000RPM 3.5" SAS internal hard drive

SKU CH-8RRK-2CCS0

300 GB 3.5-inch SAS drive spins at 15 000 RPM with 16 MB cache for fast server storage

  • 300 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • SAS 3 Gb/s interface connects to enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits standard drive bays

300GB 15000RPM SAS drive

The Dell ST3300555SS is a 300GB 3.5-inch internal hard drive spinning at 15000RPM with a SAS 3Gb/s interface and a 16MB cache. It is built for servers and workstations that need fast sequential access in a 3.5-inch form factor. The drive arrives new as a bare unit without brackets or cables.

Sustained throughput on SAS 3Gb/s

Under continuous load the 15000RPM spindle keeps sequential transfer rates steady across the 300GB capacity. The 16MB buffer absorbs burst requests while the SAS 3Gb/s link maintains consistent bandwidth during long write or read sessions. Performance scales with queue depth on compatible controllers.

Thermals and power in normal use

The 3.5-inch mechanism runs at typical enterprise temperatures when mounted with adequate airflow in a server chassis. Acoustic output is noticeable but expected for a 15000RPM spindle in rack environments. Power draw follows standard SAS 3Gb/s specifications for drives of this capacity and speed class.

Privalumai

  • 300 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • SAS 3 Gb/s interface connects to enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits standard drive bays

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How much heat and noise should I expect from a 15000RPM SAS drive running continuously?

A 15000RPM spindle generates more heat and acoustic output than slower drives; ensure your chassis has adequate airflow over the 3.5" bays and plan for a higher thermal load during all-day operation.

What host interface and connector does the ST3300555SS require to function?

The drive uses a 3.5" SAS 3Gb/s interface, so the system must provide a compatible SAS backplane or controller with the correct power and data connectors for a bare 3.5" unit.

Can the ST3300555SS share a SAS controller with older 3Gb/s or slower SAS drives?

Yes, the 3Gb/s SAS link will negotiate down to match slower SAS devices on the same controller, allowing mixed-generation arrays to operate at each drive's rated speed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.