Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 3.5 inch SAS hard drive bare unit

DELL

DELL ST3300555SS 300GB 15000RPM 3.5" SAS internal hard drive

SKU CH-8RRK-2CCS0

300 GB 3.5-inch SAS drive spins at 15 000 RPM with 16 MB cache for fast server storage

  • 300 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • SAS 3 Gb/s interface connects to enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits standard drive bays

300GB 15000RPM SAS drive

The Dell ST3300555SS is a 300GB 3.5-inch internal hard drive spinning at 15000RPM with a SAS 3Gb/s interface and a 16MB cache. It is built for servers and workstations that need fast sequential access in a 3.5-inch form factor. The drive arrives new as a bare unit without brackets or cables.

Sustained throughput on SAS 3Gb/s

Under continuous load the 15000RPM spindle keeps sequential transfer rates steady across the 300GB capacity. The 16MB buffer absorbs burst requests while the SAS 3Gb/s link maintains consistent bandwidth during long write or read sessions. Performance scales with queue depth on compatible controllers.

Thermals and power in normal use

The 3.5-inch mechanism runs at typical enterprise temperatures when mounted with adequate airflow in a server chassis. Acoustic output is noticeable but expected for a 15000RPM spindle in rack environments. Power draw follows standard SAS 3Gb/s specifications for drives of this capacity and speed class.

Prednosti

  • 300 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • SAS 3 Gb/s interface connects to enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits standard drive bays

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How much heat and noise should I expect from a 15000RPM SAS drive running continuously?

A 15000RPM spindle generates more heat and acoustic output than slower drives; ensure your chassis has adequate airflow over the 3.5" bays and plan for a higher thermal load during all-day operation.

What host interface and connector does the ST3300555SS require to function?

The drive uses a 3.5" SAS 3Gb/s interface, so the system must provide a compatible SAS backplane or controller with the correct power and data connectors for a bare 3.5" unit.

Can the ST3300555SS share a SAS controller with older 3Gb/s or slower SAS drives?

Yes, the 3Gb/s SAS link will negotiate down to match slower SAS devices on the same controller, allowing mixed-generation arrays to operate at each drive's rated speed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.