Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Aluminium heatsink with integrated fan for ProLiant DL60 and DL120 Gen9 servers

Fans

Fans Heatsink CPU Cooler for ProLiant DL60 DL120 Gen9 790498 778572

SKU CH-PS0C-6B9HT

Replacement heatsink CPU cooler for ProLiant DL60 and DL120 Gen9 servers

  • Compatible with ProLiant DL60 Gen9 servers
  • Compatible with ProLiant DL120 Gen9 servers
  • Original HP part numbers 790498-001 and 778572-001
  • Brand-new condition for reliable operation

Compatibility with ProLiant DL60 and DL120 Gen9

This heatsink cooler is built to fit the CPU processor sockets in HPE ProLiant DL60 and DL120 Gen9 servers. It matches part numbers 790498-001 and 778572-001 for direct replacement. The unit is supplied new and ready for installation in compatible systems. It serves administrators maintaining these specific server models.

Thermal performance in normal server operation

The cooler dissipates heat from the processor using forced airflow through the heatsink fins. Fan speed adjusts to thermal load, keeping noise proportional to cooling demand. Power draw remains within the server's designed thermal envelope during typical workloads. The assembly is engineered for continuous operation in rack environments.

Põhijooned

  • Compatible with ProLiant DL60 Gen9 servers
  • Compatible with ProLiant DL120 Gen9 servers
  • Original HP part numbers 790498-001 and 778572-001
  • Brand-new condition for reliable operation

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

How do I install the heatsink on a ProLiant DL60 Gen9, and which step is often missed?

Align the heatsink with the CPU socket mounting holes, apply thermal paste if the old layer is dry, then tighten the captive screws in a diagonal pattern; the step most people skip is removing the protective plastic film from the base before mounting.

What maintenance will this cooler need after extended use in a DL120 Gen9?

Dust the fin stack with compressed air every few months and replace the thermal paste between the CPU and heatsink every two to three years to keep temperatures stable.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.