Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Aluminium heatsink with integrated fan for ProLiant DL60 and DL120 Gen9 servers

Fans

Fans Heatsink CPU Cooler for ProLiant DL60 DL120 Gen9 790498 778572

SKU CH-PS0C-6B9HT

Replacement heatsink CPU cooler for ProLiant DL60 and DL120 Gen9 servers

  • Compatible with ProLiant DL60 Gen9 servers
  • Compatible with ProLiant DL120 Gen9 servers
  • Original HP part numbers 790498-001 and 778572-001
  • Brand-new condition for reliable operation

Compatibility with ProLiant DL60 and DL120 Gen9

This heatsink cooler is built to fit the CPU processor sockets in HPE ProLiant DL60 and DL120 Gen9 servers. It matches part numbers 790498-001 and 778572-001 for direct replacement. The unit is supplied new and ready for installation in compatible systems. It serves administrators maintaining these specific server models.

Thermal performance in normal server operation

The cooler dissipates heat from the processor using forced airflow through the heatsink fins. Fan speed adjusts to thermal load, keeping noise proportional to cooling demand. Power draw remains within the server's designed thermal envelope during typical workloads. The assembly is engineered for continuous operation in rack environments.

Poudarki

  • Compatible with ProLiant DL60 Gen9 servers
  • Compatible with ProLiant DL120 Gen9 servers
  • Original HP part numbers 790498-001 and 778572-001
  • Brand-new condition for reliable operation

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I install the heatsink on a ProLiant DL60 Gen9, and which step is often missed?

Align the heatsink with the CPU socket mounting holes, apply thermal paste if the old layer is dry, then tighten the captive screws in a diagonal pattern; the step most people skip is removing the protective plastic film from the base before mounting.

What maintenance will this cooler need after extended use in a DL120 Gen9?

Dust the fin stack with compressed air every few months and replace the thermal paste between the CPU and heatsink every two to three years to keep temperatures stable.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.