Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Aluminium heatsink with integrated fan for ProLiant DL60 and DL120 Gen9 servers

Fans

Fans Heatsink CPU Cooler for ProLiant DL60 DL120 Gen9 790498 778572

SKU CH-PS0C-6B9HT

Replacement heatsink CPU cooler for ProLiant DL60 and DL120 Gen9 servers

  • Compatible with ProLiant DL60 Gen9 servers
  • Compatible with ProLiant DL120 Gen9 servers
  • Original HP part numbers 790498-001 and 778572-001
  • Brand-new condition for reliable operation

Compatibility with ProLiant DL60 and DL120 Gen9

This heatsink cooler is built to fit the CPU processor sockets in HPE ProLiant DL60 and DL120 Gen9 servers. It matches part numbers 790498-001 and 778572-001 for direct replacement. The unit is supplied new and ready for installation in compatible systems. It serves administrators maintaining these specific server models.

Thermal performance in normal server operation

The cooler dissipates heat from the processor using forced airflow through the heatsink fins. Fan speed adjusts to thermal load, keeping noise proportional to cooling demand. Power draw remains within the server's designed thermal envelope during typical workloads. The assembly is engineered for continuous operation in rack environments.

Helstu kostir

  • Compatible with ProLiant DL60 Gen9 servers
  • Compatible with ProLiant DL120 Gen9 servers
  • Original HP part numbers 790498-001 and 778572-001
  • Brand-new condition for reliable operation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How do I install the heatsink on a ProLiant DL60 Gen9, and which step is often missed?

Align the heatsink with the CPU socket mounting holes, apply thermal paste if the old layer is dry, then tighten the captive screws in a diagonal pattern; the step most people skip is removing the protective plastic film from the base before mounting.

What maintenance will this cooler need after extended use in a DL120 Gen9?

Dust the fin stack with compressed air every few months and replace the thermal paste between the CPU and heatsink every two to three years to keep temperatures stable.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.