Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two black metal drive trays with rubber grommets and thumbscrews

Fractal Design

Fractal Design FD-A-TRAY-001 HDD Drive Tray Kit 2-pack case accessory

SKU CH-659F-2AT6J MPN FD-A-TRAY-001

Two 3.5"/2.5" drive trays with captive thumbscrews and vibration-damping grommets for Fractal Design Type-B mounts

  • TypesDrive Mounts
  • ColorsBlack
  • SpecificationsCompatibility: Cases with Fractal Design Type-B HDD Mounts (
  • FeaturesIncludes two 3.5"/2.5" HDD/SSD trays and mounting hardware F
  • Mount two extra drives with the included pair of trays
  • Fit 3.5" or 2.5" HDDs and SSDs using the supplied hardware
  • Reduce vibration with the eight rubber dampers provided
  • Install quickly thanks to the two captive thumbscrews
  • Matches Define 7 Series and other Type-B compatible cases

Two-Tray HDD Kit for Type-B Mounts

This two-pack adds a pair of 3.5"/2.5" drive trays to any Fractal Design case that uses Type-B HDD mounts, including the Define 7 and Meshify 2 series. It targets builders who need extra internal storage bays without replacing their chassis.

Vibration Dampers and Captive Thumbscrews

Each tray ships with rubber grommets that isolate mechanical drives from the case frame, reducing transmitted noise. Captive thumbscrews let you secure or remove trays without tools, while the included 6-32 and M3 screws cover both 3.5" and 2.5" devices.

Dual-Drive Capacity per Kit

One kit holds up to two drives, mixing 3.5" HDDs and 2.5" SSDs in any combination. Builders planning more than two additional drives will need multiple kits, and the trays only fit cases with Type-B mounting positions.

Põhijooned

  • Mount two extra drives with the included pair of trays
  • Fit 3.5" or 2.5" HDDs and SSDs using the supplied hardware
  • Reduce vibration with the eight rubber dampers provided
  • Install quickly thanks to the two captive thumbscrews
  • Matches Define 7 Series and other Type-B compatible cases

Tehnilised andmed

BrandFractal Design
ModelFD-A-TRAY-001
TypesDrive Mounts
ColorsBlack
SpecificationsCompatibility: Cases with Fractal Design Type-B HDD Mounts (Define 7 Series)
Package Contents:
2 x HDD trays
8 x 6-32 screws for HDD
8 x HDD dampers
8 x M3 screws for 2.5" SSD/HDD
2 x captive thumbscrew
FeaturesIncludes two 3.5"/2.5" HDD/SSD trays and mounting hardware
For use in Define 7 Series and other Fractal Design cases with Type-B HDD mounts
Includes vibration damping rubber grommets
Captive thumbscrews for easy installation
Available in black or white
Tarnekaal0.35 kg
Pakendi mõõtmed183 × 124 × 36 mm

Küsimused selle toote kohta

Will the vibration-damping rubber grommets on the trays need periodic replacement?

The kit includes eight HDD dampers made of rubber; they are fitted once during installation and have no stated replacement interval.

What limits how many of these Type-B trays I can install in a Define 7 case?

The case itself determines the limit — only the available Type-B HDD mounting positions inside the chassis can accept these trays.

Do the captive thumbscrews or steel trays add noticeable heat or noise when drives run continuously?

The trays are passive metal brackets with captive thumbscrews and rubber grommets; they add no active cooling, power draw or moving parts.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.