Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two black metal drive trays with rubber grommets and thumbscrews

Fractal Design

Fractal Design FD-A-TRAY-001 HDD Drive Tray Kit 2-pack case accessory

SKU CH-659F-2AT6J MPN FD-A-TRAY-001

Two 3.5"/2.5" drive trays with captive thumbscrews and vibration-damping grommets for Fractal Design Type-B mounts

  • TypesDrive Mounts
  • ColorsBlack
  • SpecificationsCompatibility: Cases with Fractal Design Type-B HDD Mounts (
  • FeaturesIncludes two 3.5"/2.5" HDD/SSD trays and mounting hardware F
  • Mount two extra drives with the included pair of trays
  • Fit 3.5" or 2.5" HDDs and SSDs using the supplied hardware
  • Reduce vibration with the eight rubber dampers provided
  • Install quickly thanks to the two captive thumbscrews
  • Matches Define 7 Series and other Type-B compatible cases

Two-Tray HDD Kit for Type-B Mounts

This two-pack adds a pair of 3.5"/2.5" drive trays to any Fractal Design case that uses Type-B HDD mounts, including the Define 7 and Meshify 2 series. It targets builders who need extra internal storage bays without replacing their chassis.

Vibration Dampers and Captive Thumbscrews

Each tray ships with rubber grommets that isolate mechanical drives from the case frame, reducing transmitted noise. Captive thumbscrews let you secure or remove trays without tools, while the included 6-32 and M3 screws cover both 3.5" and 2.5" devices.

Dual-Drive Capacity per Kit

One kit holds up to two drives, mixing 3.5" HDDs and 2.5" SSDs in any combination. Builders planning more than two additional drives will need multiple kits, and the trays only fit cases with Type-B mounting positions.

Najważniejsze cechy

  • Mount two extra drives with the included pair of trays
  • Fit 3.5" or 2.5" HDDs and SSDs using the supplied hardware
  • Reduce vibration with the eight rubber dampers provided
  • Install quickly thanks to the two captive thumbscrews
  • Matches Define 7 Series and other Type-B compatible cases

Specyfikacja

BrandFractal Design
ModelFD-A-TRAY-001
TypesDrive Mounts
ColorsBlack
SpecificationsCompatibility: Cases with Fractal Design Type-B HDD Mounts (Define 7 Series)
Package Contents:
2 x HDD trays
8 x 6-32 screws for HDD
8 x HDD dampers
8 x M3 screws for 2.5" SSD/HDD
2 x captive thumbscrew
FeaturesIncludes two 3.5"/2.5" HDD/SSD trays and mounting hardware
For use in Define 7 Series and other Fractal Design cases with Type-B HDD mounts
Includes vibration damping rubber grommets
Captive thumbscrews for easy installation
Available in black or white
Waga przesyłki0.35 kg
Wymiary opakowania183 × 124 × 36 mm

Pytania dotyczące tego produktu

Will the vibration-damping rubber grommets on the trays need periodic replacement?

The kit includes eight HDD dampers made of rubber; they are fitted once during installation and have no stated replacement interval.

What limits how many of these Type-B trays I can install in a Define 7 case?

The case itself determines the limit — only the available Type-B HDD mounting positions inside the chassis can accept these trays.

Do the captive thumbscrews or steel trays add noticeable heat or noise when drives run continuously?

The trays are passive metal brackets with captive thumbscrews and rubber grommets; they add no active cooling, power draw or moving parts.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.