Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black metal drive trays with rubber grommets and thumbscrews

Fractal Design

Fractal Design FD-A-TRAY-001 HDD Drive Tray Kit 2-pack case accessory

SKU CH-659F-2AT6J MPN FD-A-TRAY-001

Two 3.5"/2.5" drive trays with captive thumbscrews and vibration-damping grommets for Fractal Design Type-B mounts

  • TypesDrive Mounts
  • ColorsBlack
  • SpecificationsCompatibility: Cases with Fractal Design Type-B HDD Mounts (
  • FeaturesIncludes two 3.5"/2.5" HDD/SSD trays and mounting hardware F
  • Mount two extra drives with the included pair of trays
  • Fit 3.5" or 2.5" HDDs and SSDs using the supplied hardware
  • Reduce vibration with the eight rubber dampers provided
  • Install quickly thanks to the two captive thumbscrews
  • Matches Define 7 Series and other Type-B compatible cases

Two-Tray HDD Kit for Type-B Mounts

This two-pack adds a pair of 3.5"/2.5" drive trays to any Fractal Design case that uses Type-B HDD mounts, including the Define 7 and Meshify 2 series. It targets builders who need extra internal storage bays without replacing their chassis.

Vibration Dampers and Captive Thumbscrews

Each tray ships with rubber grommets that isolate mechanical drives from the case frame, reducing transmitted noise. Captive thumbscrews let you secure or remove trays without tools, while the included 6-32 and M3 screws cover both 3.5" and 2.5" devices.

Dual-Drive Capacity per Kit

One kit holds up to two drives, mixing 3.5" HDDs and 2.5" SSDs in any combination. Builders planning more than two additional drives will need multiple kits, and the trays only fit cases with Type-B mounting positions.

Přednosti

  • Mount two extra drives with the included pair of trays
  • Fit 3.5" or 2.5" HDDs and SSDs using the supplied hardware
  • Reduce vibration with the eight rubber dampers provided
  • Install quickly thanks to the two captive thumbscrews
  • Matches Define 7 Series and other Type-B compatible cases

Specifikace

BrandFractal Design
ModelFD-A-TRAY-001
TypesDrive Mounts
ColorsBlack
SpecificationsCompatibility: Cases with Fractal Design Type-B HDD Mounts (Define 7 Series)
Package Contents:
2 x HDD trays
8 x 6-32 screws for HDD
8 x HDD dampers
8 x M3 screws for 2.5" SSD/HDD
2 x captive thumbscrew
FeaturesIncludes two 3.5"/2.5" HDD/SSD trays and mounting hardware
For use in Define 7 Series and other Fractal Design cases with Type-B HDD mounts
Includes vibration damping rubber grommets
Captive thumbscrews for easy installation
Available in black or white
Přepravní hmotnost0.35 kg
Rozměry balení183 × 124 × 36 mm

Otázky k tomuto produktu

Will the vibration-damping rubber grommets on the trays need periodic replacement?

The kit includes eight HDD dampers made of rubber; they are fitted once during installation and have no stated replacement interval.

What limits how many of these Type-B trays I can install in a Define 7 case?

The case itself determines the limit — only the available Type-B HDD mounting positions inside the chassis can accept these trays.

Do the captive thumbscrews or steel trays add noticeable heat or noise when drives run continuously?

The trays are passive metal brackets with captive thumbscrews and rubber grommets; they add no active cooling, power draw or moving parts.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.