Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Red Ripjaws X DDR3 DIMM with 240 pins and tall heat spreader

G.SKILL

G.SKILL Ripjaws X F3-12800CL10S-8GBXL 8GB DDR3 1600 desktop RAM

SKU CH-3SQ5-GJRP8 MPN F3-12800CL10S-8GBXL

8 GB DDR3 1600 module with CL10 10-10-10-30 timing and 1.5 V heat spreader for Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms

  • Capacity8GB
  • Type240-Pin PC RAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL10
  • Timing10-10-10-30
  • Voltage1.50V
  • 8GB capacity expands multitasking headroom
  • DDR3 1600 speed feeds data faster to CPU
  • CL10 latency reduces wait cycles for snappier response
  • 50V operation keeps temperatures lower under load
  • Red heat spreader dissipates heat for stable sustained performance

Ripjaws X 8GB DDR3 1600 module

This 8GB DDR3 1600 DIMM uses a 240-pin desktop form factor and runs at PC3-12800 speed with CL10 10-10-10-30 timings. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano, AM3+ platforms and includes Intel XMP profiles for 1st, 2nd and 3rd Generation Intel Core processors. The red heat spreader is fitted as standard.

Check motherboard DDR3 slots and voltage

Verify that your board accepts DDR3 memory and has a free 240-pin slot before ordering. The module operates at 1.50V, so the motherboard must support that voltage. Confirm the maximum capacity per slot and total system limit in the board manual. No ECC or registered buffer is present on this stick.

Heat spreader sustains 1600 speed under load

The integrated heat spreader dissipates heat during extended sessions, helping the module hold its rated 1600MHz frequency and CL10 timings without throttling. Continuous operation at 1.50V keeps internal temperatures lower than higher-voltage kits. Each unit is 100% tested for stability under sustained workloads.

Põhijooned

  • 8GB capacity expands multitasking headroom
  • DDR3 1600 speed feeds data faster to CPU
  • CL10 latency reduces wait cycles for snappier response
  • 50V operation keeps temperatures lower under load
  • Red heat spreader dissipates heat for stable sustained performance

Tehnilised andmed

BrandG.SKILL
SeriesRipjaws X Series
ModelF3-12800CL10S-8GBXL
Capacity8GB
Type240-Pin PC RAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL10
Timing10-10-10-30
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorRed
Heat SpreaderYes
FeaturesCompatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms
Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors
Tarnekaal0.10 kg
Pakendi mõõtmed206 × 133 × 18 mm

Küsimused selle toote kohta

Will this 8 GB DDR3 1600 module work in my Intel LGA 1155 motherboard?

Yes, the kit is validated for Intel LGA 1155 and LGA 1156 platforms as well as AMD AM3, AM3+ and Llano sockets.

Does the 1.50 V operating voltage match standard desktop DDR3 requirements?

It runs at the standard 1.50 V, so no special voltage settings are needed on any compatible board.

What does the CL10 10-10-10-30 timing mean for real-world responsiveness?

The CAS latency of 10 cycles at 1600 MHz gives low access delay, helping applications and games feel snappier.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.