BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
G.SKILL
8 GB DDR3 1600 module with CL10 10-10-10-30 timing and 1.5 V heat spreader for Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms
This 8GB DDR3 1600 DIMM uses a 240-pin desktop form factor and runs at PC3-12800 speed with CL10 10-10-10-30 timings. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano, AM3+ platforms and includes Intel XMP profiles for 1st, 2nd and 3rd Generation Intel Core processors. The red heat spreader is fitted as standard.
Verify that your board accepts DDR3 memory and has a free 240-pin slot before ordering. The module operates at 1.50V, so the motherboard must support that voltage. Confirm the maximum capacity per slot and total system limit in the board manual. No ECC or registered buffer is present on this stick.
The integrated heat spreader dissipates heat during extended sessions, helping the module hold its rated 1600MHz frequency and CL10 timings without throttling. Continuous operation at 1.50V keeps internal temperatures lower than higher-voltage kits. Each unit is 100% tested for stability under sustained workloads.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL10S-8GBXL |
| Capacity | 8GB |
| Type | 240-Pin PC RAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10-30 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| وزن الشحنة | 0.10 kg |
| أبعاد الطرد | 206 × 133 × 18 mm |
Yes, the kit is validated for Intel LGA 1155 and LGA 1156 platforms as well as AMD AM3, AM3+ and Llano sockets.
It runs at the standard 1.50 V, so no special voltage settings are needed on any compatible board.
The CAS latency of 10 cycles at 1600 MHz gives low access delay, helping applications and games feel snappier.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟