BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
G.SKILL
8 GB DDR3 1600 module with CL10 10-10-10-30 timing and 1.5 V heat spreader for Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms
This 8GB DDR3 1600 DIMM uses a 240-pin desktop form factor and runs at PC3-12800 speed with CL10 10-10-10-30 timings. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano, AM3+ platforms and includes Intel XMP profiles for 1st, 2nd and 3rd Generation Intel Core processors. The red heat spreader is fitted as standard.
Verify that your board accepts DDR3 memory and has a free 240-pin slot before ordering. The module operates at 1.50V, so the motherboard must support that voltage. Confirm the maximum capacity per slot and total system limit in the board manual. No ECC or registered buffer is present on this stick.
The integrated heat spreader dissipates heat during extended sessions, helping the module hold its rated 1600MHz frequency and CL10 timings without throttling. Continuous operation at 1.50V keeps internal temperatures lower than higher-voltage kits. Each unit is 100% tested for stability under sustained workloads.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL10S-8GBXL |
| Capacity | 8GB |
| Type | 240-Pin PC RAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10-30 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| Prepravná hmotnosť | 0.10 kg |
| Rozmery balenia | 206 × 133 × 18 mm |
Yes, the kit is validated for Intel LGA 1155 and LGA 1156 platforms as well as AMD AM3, AM3+ and Llano sockets.
It runs at the standard 1.50 V, so no special voltage settings are needed on any compatible board.
The CAS latency of 10 cycles at 1600 MHz gives low access delay, helping applications and games feel snappier.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?