BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
G.SKILL
8 GB DDR3 1600 module with CL10 10-10-10-30 timing and 1.5 V heat spreader for Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms
This 8GB DDR3 1600 DIMM uses a 240-pin desktop form factor and runs at PC3-12800 speed with CL10 10-10-10-30 timings. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano, AM3+ platforms and includes Intel XMP profiles for 1st, 2nd and 3rd Generation Intel Core processors. The red heat spreader is fitted as standard.
Verify that your board accepts DDR3 memory and has a free 240-pin slot before ordering. The module operates at 1.50V, so the motherboard must support that voltage. Confirm the maximum capacity per slot and total system limit in the board manual. No ECC or registered buffer is present on this stick.
The integrated heat spreader dissipates heat during extended sessions, helping the module hold its rated 1600MHz frequency and CL10 timings without throttling. Continuous operation at 1.50V keeps internal temperatures lower than higher-voltage kits. Each unit is 100% tested for stability under sustained workloads.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL10S-8GBXL |
| Capacity | 8GB |
| Type | 240-Pin PC RAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10-30 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| Težina pošiljke | 0.10 kg |
| Dimenzije pakiranja | 206 × 133 × 18 mm |
Yes, the kit is validated for Intel LGA 1155 and LGA 1156 platforms as well as AMD AM3, AM3+ and Llano sockets.
It runs at the standard 1.50 V, so no special voltage settings are needed on any compatible board.
The CAS latency of 10 cycles at 1600 MHz gives low access delay, helping applications and games feel snappier.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?