Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory
- Lavender
- Filament
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Kit of 25 reusable vacuum bags (32 × 34 cm) with USB pump and five clips stores 0.5, .75 and 1 kg filament spools light-proof and humidity-resistant
The Hifree kit contains 25 reusable vacuum bags sized 32 by 34 cm (12.6 by 13.4 in). They accept 1.75 mm, 2.85 mm and 3 mm filaments in 0.5 kg, 0.75 kg and 1 kg spools. The bags suit PA, PC, PLA, ABS, TPU, ASA, PETG and other common materials. Each bag uses a black and transparent dual-sided design that blocks light on one side while letting you inspect the spool through the other.
One USB-powered vacuum pump draws air from the valve in about 12 seconds and stops automatically. It runs from any USB port, including power banks and laptops, so no mains adapter is needed. Five sealing clips lock the bag opening before evacuation, creating a repeatable seal that resists punctures thanks to the thick PA+PE composite film. The kit replaces single-use desiccant packs with a reusable humidity barrier.
Press the valve flat, align the pump nozzle, then hold for 12 seconds until the pump halts. The process is quick, but the clip must sit squarely across the full width of the bag or air will leak back in. Overfilling a bag above the spool height can also prevent the valve from seating properly. Users who skip the flat-valve step often blame the pump when the seal fails.
| Brand | Hifree |
|---|---|
| Part Number | 25PCS 3D Filament Storage Bags |
| Compatible System | Convenient pack of 25, high-quality material |
| Specification | Convenient pack of 25, high-quality material |
| Features | Convenient pack of 25, high-quality material |
The kit includes five sealing clips made for repeated use; swap a clip only if the hinge loosens or the teeth no longer grip the bag edge.
Each 32 by 34 centimetre bag fits one 0.5, 0.75 or 1 kilogram spool in 1.75, 2.85 or 3 millimetre diameters.
The pump runs on any USB port and stops automatically after roughly 12 seconds per bag, so it stays cool and quiet even with back-to-back use.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?