Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory
- Lavender
- Filament
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Kit of 25 reusable vacuum bags (32 × 34 cm) with USB pump and five clips stores 0.5, .75 and 1 kg filament spools light-proof and humidity-resistant
The Hifree kit contains 25 reusable vacuum bags sized 32 by 34 cm (12.6 by 13.4 in). They accept 1.75 mm, 2.85 mm and 3 mm filaments in 0.5 kg, 0.75 kg and 1 kg spools. The bags suit PA, PC, PLA, ABS, TPU, ASA, PETG and other common materials. Each bag uses a black and transparent dual-sided design that blocks light on one side while letting you inspect the spool through the other.
One USB-powered vacuum pump draws air from the valve in about 12 seconds and stops automatically. It runs from any USB port, including power banks and laptops, so no mains adapter is needed. Five sealing clips lock the bag opening before evacuation, creating a repeatable seal that resists punctures thanks to the thick PA+PE composite film. The kit replaces single-use desiccant packs with a reusable humidity barrier.
Press the valve flat, align the pump nozzle, then hold for 12 seconds until the pump halts. The process is quick, but the clip must sit squarely across the full width of the bag or air will leak back in. Overfilling a bag above the spool height can also prevent the valve from seating properly. Users who skip the flat-valve step often blame the pump when the seal fails.
| Brand | Hifree |
|---|---|
| Part Number | 25PCS 3D Filament Storage Bags |
| Compatible System | Convenient pack of 25, high-quality material |
| Specification | Convenient pack of 25, high-quality material |
| Features | Convenient pack of 25, high-quality material |
The kit includes five sealing clips made for repeated use; swap a clip only if the hinge loosens or the teeth no longer grip the bag edge.
Each 32 by 34 centimetre bag fits one 0.5, 0.75 or 1 kilogram spool in 1.75, 2.85 or 3 millimetre diameters.
The pump runs on any USB port and stops automatically after roughly 12 seconds per bag, so it stays cool and quiet even with back-to-back use.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?