Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory
- Lavender
- Filament
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Kit of 25 reusable vacuum bags (32 × 34 cm) with USB pump and five clips stores 0.5, .75 and 1 kg filament spools light-proof and humidity-resistant
The Hifree kit contains 25 reusable vacuum bags sized 32 by 34 cm (12.6 by 13.4 in). They accept 1.75 mm, 2.85 mm and 3 mm filaments in 0.5 kg, 0.75 kg and 1 kg spools. The bags suit PA, PC, PLA, ABS, TPU, ASA, PETG and other common materials. Each bag uses a black and transparent dual-sided design that blocks light on one side while letting you inspect the spool through the other.
One USB-powered vacuum pump draws air from the valve in about 12 seconds and stops automatically. It runs from any USB port, including power banks and laptops, so no mains adapter is needed. Five sealing clips lock the bag opening before evacuation, creating a repeatable seal that resists punctures thanks to the thick PA+PE composite film. The kit replaces single-use desiccant packs with a reusable humidity barrier.
Press the valve flat, align the pump nozzle, then hold for 12 seconds until the pump halts. The process is quick, but the clip must sit squarely across the full width of the bag or air will leak back in. Overfilling a bag above the spool height can also prevent the valve from seating properly. Users who skip the flat-valve step often blame the pump when the seal fails.
| Brand | Hifree |
|---|---|
| Part Number | 25PCS 3D Filament Storage Bags |
| Compatible System | Convenient pack of 25, high-quality material |
| Specification | Convenient pack of 25, high-quality material |
| Features | Convenient pack of 25, high-quality material |
The kit includes five sealing clips made for repeated use; swap a clip only if the hinge loosens or the teeth no longer grip the bag edge.
Each 32 by 34 centimetre bag fits one 0.5, 0.75 or 1 kilogram spool in 1.75, 2.85 or 3 millimetre diameters.
The pump runs on any USB port and stops automatically after roughly 12 seconds per bag, so it stays cool and quiet even with back-to-back use.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?