Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory
- Lavender
- Filament
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Kit of 25 reusable vacuum bags (32 × 34 cm) with USB pump and five clips stores 0.5, .75 and 1 kg filament spools light-proof and humidity-resistant
The Hifree kit contains 25 reusable vacuum bags sized 32 by 34 cm (12.6 by 13.4 in). They accept 1.75 mm, 2.85 mm and 3 mm filaments in 0.5 kg, 0.75 kg and 1 kg spools. The bags suit PA, PC, PLA, ABS, TPU, ASA, PETG and other common materials. Each bag uses a black and transparent dual-sided design that blocks light on one side while letting you inspect the spool through the other.
One USB-powered vacuum pump draws air from the valve in about 12 seconds and stops automatically. It runs from any USB port, including power banks and laptops, so no mains adapter is needed. Five sealing clips lock the bag opening before evacuation, creating a repeatable seal that resists punctures thanks to the thick PA+PE composite film. The kit replaces single-use desiccant packs with a reusable humidity barrier.
Press the valve flat, align the pump nozzle, then hold for 12 seconds until the pump halts. The process is quick, but the clip must sit squarely across the full width of the bag or air will leak back in. Overfilling a bag above the spool height can also prevent the valve from seating properly. Users who skip the flat-valve step often blame the pump when the seal fails.
| Brand | Hifree |
|---|---|
| Part Number | 25PCS 3D Filament Storage Bags |
| Compatible System | Convenient pack of 25, high-quality material |
| Specification | Convenient pack of 25, high-quality material |
| Features | Convenient pack of 25, high-quality material |
The kit includes five sealing clips made for repeated use; swap a clip only if the hinge loosens or the teeth no longer grip the bag edge.
Each 32 by 34 centimetre bag fits one 0.5, 0.75 or 1 kilogram spool in 1.75, 2.85 or 3 millimetre diameters.
The pump runs on any USB port and stops automatically after roughly 12 seconds per bag, so it stays cool and quiet even with back-to-back use.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?