Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Jungle Leopard
Three 120 mm hydraulic-bearing fans with reverse blades, 5 V ARGB daisy-chain lighting and PWM speed control from 800 to 2000 RPM
Color Black Reverse
The Jungle Leopard Galaxy set delivers three 120 mm case fans with a reverse-blade layout, hydraulic bearings and addressable RGB lighting. Each unit spins between 800 and 2000 RPM, pushing 62.36 CFM at 2.21 mmAq while staying at 29 dBA. A 4-pin PWM connector handles speed control and a 5 V 3-pin ARGB header synchronises lighting across major motherboard platforms. The black finish measures 120×120×25 mm (4.72×4.72×0.98 in).
A slide-in pin-to-pin interlock lets the three fans connect in series so only one cable runs back to the motherboard for both power and lighting. This replaces the usual tangle of individual fan and RGB cables, cutting routing time and leaving the chassis interior cleaner. The jump is worth it when building in a compact case or when several fans share a single RGB header and PWM channel.
The fans require a 5 V 3-pin ARGB header and a 4-pin PWM header on the motherboard; older 12 V 4-pin RGB or 3-pin voltage-controlled headers will not drive the lighting or speed curves. Total current draw of the daisy-chained cluster must stay within the header’s rated limit, otherwise lighting may flicker or fans may not reach 2000 RPM. No controller box is included, so boards without spare 5 V ARGB and PWM headers cannot use the synchronisation features.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Each fan measures 120×120×25 mm, the common 120 mm mounting pattern, so they fit any case designed for 120 mm fans.
Slide the fans together using the pin-to-pin interlock, run one combined ARGB lead to a 5 V 3-pin header and one PWM lead to a 4-pin header on the motherboard.
Hydraulic bearings typically last several years at 29 dBA; listen for rising noise or rpm drop below the 800–2000 rpm range as a sign to swap the fan.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?