Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Jungle Leopard
Three 120 mm case fans with hydraulic bearings deliver 62.36 CFM at 29 dBA and include 5 V ARGB lighting with daisy-chain cabling
Color White Forward
This pack contains three 120 mm Galaxy case fans with hydraulic bearings and a white finish. Each unit delivers up to 62.36 CFM at 2.21 mmAq static pressure while spinning at 2000 RPM. The 5 V ARGB lighting and PWM speed control suit builders who want synchronised illumination and automatic thermal management.
The slide-in interlocking mechanism lets the three fans connect pin-to-pin so only one cable runs to the motherboard per cluster. This reduces cable clutter and shortens installation time, but the fixed spacing may not align with every case fan mount pattern. Builders with irregular hole layouts or tight clearances should verify compatibility before committing.
Lighting synchronisation requires a motherboard 5 V 3-pin ARGB header; older 12 V 4-pin RGB headers will not work. PWM control operates between 800 and 2000 RPM via a standard 4-pin fan connector, so boards lacking PWM headers lose automatic speed curves. The 29 dBA noise floor at full speed may be audible in quiet environments.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Use your motherboard BIOS or fan-control software to read the reported speed; the fans should vary between 800 and 2000 RPM depending on CPU temperature.
The box contains three 120×120×25 mm fans with hydraulic bearings; the slide-in pin-to-pin interlocking lets them daisy-chain so only one 5 V 3-pin ARGB and one 4-pin PWM cable are required for the whole cluster.
Both colours share identical specs — 62.36 CFM airflow, 2.21 mmAq pressure and 29 dBA noise — so pick the colour that matches your case aesthetic.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?