Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Jungle Leopard
Three 120 mm hydraulic-bearing fans with reverse blades, 5 V ARGB daisy-chain lighting and PWM speed control from 800 to 2000 RPM
Color Black Reverse
The Jungle Leopard Galaxy set delivers three 120 mm case fans with a reverse-blade layout, hydraulic bearings and addressable RGB lighting. Each unit spins between 800 and 2000 RPM, pushing 62.36 CFM at 2.21 mmAq while staying at 29 dBA. A 4-pin PWM connector handles speed control and a 5 V 3-pin ARGB header synchronises lighting across major motherboard platforms. The black finish measures 120×120×25 mm (4.72×4.72×0.98 in).
A slide-in pin-to-pin interlock lets the three fans connect in series so only one cable runs back to the motherboard for both power and lighting. This replaces the usual tangle of individual fan and RGB cables, cutting routing time and leaving the chassis interior cleaner. The jump is worth it when building in a compact case or when several fans share a single RGB header and PWM channel.
The fans require a 5 V 3-pin ARGB header and a 4-pin PWM header on the motherboard; older 12 V 4-pin RGB or 3-pin voltage-controlled headers will not drive the lighting or speed curves. Total current draw of the daisy-chained cluster must stay within the header’s rated limit, otherwise lighting may flicker or fans may not reach 2000 RPM. No controller box is included, so boards without spare 5 V ARGB and PWM headers cannot use the synchronisation features.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each fan measures 120×120×25 mm, the common 120 mm mounting pattern, so they fit any case designed for 120 mm fans.
Slide the fans together using the pin-to-pin interlock, run one combined ARGB lead to a 5 V 3-pin header and one PWM lead to a 4-pin header on the motherboard.
Hydraulic bearings typically last several years at 29 dBA; listen for rising noise or rpm drop below the 800–2000 rpm range as a sign to swap the fan.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?