Jungle Leopard Galaxy 120mm Reverse Blade ARGB PWM Case Fans 3 Pack Black

Three-pack reverse-blade ARGB fans

The Jungle Leopard Galaxy set delivers three 120 mm case fans with a reverse-blade layout, hydraulic bearings and addressable RGB lighting. Each unit spins between 800 and 2000 RPM, pushing 62.36 CFM at 2.21 mmAq while staying at 29 dBA. A 4-pin PWM connector handles speed control and a 5 V 3-pin ARGB header synchronises lighting across major motherboard platforms. The black finish measures 120×120×25 mm (4.72×4.72×0.98 in).

Daisy-chain installation upgrade

A slide-in pin-to-pin interlock lets the three fans connect in series so only one cable runs back to the motherboard for both power and lighting. This replaces the usual tangle of individual fan and RGB cables, cutting routing time and leaving the chassis interior cleaner. The jump is worth it when building in a compact case or when several fans share a single RGB header and PWM channel.

5 V ARGB and PWM header limits

The fans require a 5 V 3-pin ARGB header and a 4-pin PWM header on the motherboard; older 12 V 4-pin RGB or 3-pin voltage-controlled headers will not drive the lighting or speed curves. Total current draw of the daisy-chained cluster must stay within the header’s rated limit, otherwise lighting may flicker or fans may not reach 2000 RPM. No controller box is included, so boards without spare 5 V ARGB and PWM headers cannot use the synchronisation features.