KingSpec NX-256 2280 256GB PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
KingSpec
M.2 2280 128GB NVMe SSD with PCIe 3.0 x4 interface, up to 2200 MBps read and 800 MBps write
Options NX-128-2280
The KingSpec NX-128 2280 is a 128GB internal SSD built on the M.2 2280 form factor with a PCIe 3.0 x4 interface and NVMe 1.3 protocol. It targets desktop and laptop users who need a compact boot or secondary drive for everyday workloads.
The drive uses 3D NAND flash and supports HMB technology to maintain performance without a dedicated DRAM cache. Rated endurance is 60TB written and the MTBF is 1000000 hours, indicating consistent operation across long write sessions within the 0°C to 70°C operating range.
The PCIe 3.0 x4 NVMe 1.3 interface delivers sequential reads up to 2200 MBps and writes up to 800 MBps, with random performance of 380000 read IOPS and 320000 write IOPS. This single interface and speed profile determines whether the drive matches the host system and workload requirements.
| Brand | KingSpec |
|---|---|
| Series | NX 2280 Series |
| Model | NX-128 2280 |
| Part Number | NX-128 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 128GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 2200 MBps |
| Max Sequential Write | Up to 800 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 320,000 IOPS |
| Terabytes Written (TBW) | 60TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
The KingSpec NX-128 2280 ships without a heatsink and is rated for 0 °C to 70 °C operating temperature, so sustained NVMe 1.3 loads will rely on your motherboard airflow to stay within that range.
It requires an M.2 2280 slot wired for PCI-Express 3.0 x4 with NVMe 1.3 support; a SATA-only M.2 slot will not work.
The NX-128 2280 uses its own PCIe 3.0 x4 lanes and NVMe 1.3 controller, so it does not share bandwidth with or affect any SATA drives already installed.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?