KingSpec NX-256 2280 256GB PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
KingSpec
M.2 2280 128GB NVMe SSD with PCIe 3.0 x4 interface, up to 2200 MBps read and 800 MBps write
Options NX-128-2280
The KingSpec NX-128 2280 is a 128GB internal SSD built on the M.2 2280 form factor with a PCIe 3.0 x4 interface and NVMe 1.3 protocol. It targets desktop and laptop users who need a compact boot or secondary drive for everyday workloads.
The drive uses 3D NAND flash and supports HMB technology to maintain performance without a dedicated DRAM cache. Rated endurance is 60TB written and the MTBF is 1000000 hours, indicating consistent operation across long write sessions within the 0°C to 70°C operating range.
The PCIe 3.0 x4 NVMe 1.3 interface delivers sequential reads up to 2200 MBps and writes up to 800 MBps, with random performance of 380000 read IOPS and 320000 write IOPS. This single interface and speed profile determines whether the drive matches the host system and workload requirements.
| Brand | KingSpec |
|---|---|
| Series | NX 2280 Series |
| Model | NX-128 2280 |
| Part Number | NX-128 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 128GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 2200 MBps |
| Max Sequential Write | Up to 800 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 320,000 IOPS |
| Terabytes Written (TBW) | 60TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The KingSpec NX-128 2280 ships without a heatsink and is rated for 0 °C to 70 °C operating temperature, so sustained NVMe 1.3 loads will rely on your motherboard airflow to stay within that range.
It requires an M.2 2280 slot wired for PCI-Express 3.0 x4 with NVMe 1.3 support; a SATA-only M.2 slot will not work.
The NX-128 2280 uses its own PCIe 3.0 x4 lanes and NVMe 1.3 controller, so it does not share bandwidth with or affect any SATA drives already installed.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?