Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
LONGER RAY5 20W laser engraver with air assist kit

LONGER

LONGER RAY5 20W Laser Engraver with Air Assist

SKU CH-E1WH-XZFY9

A 20W laser engraver with an air-assist kit for cleaner cuts and engraving

Option 20W+Air Assist kit

Näita veel 1 konfiguratsiooni
  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

20W laser engraver with air assist

The LONGER RAY5 is a 20W laser engraver supplied with an air assist kit for cleaner cuts and reduced residue. It suits hobbyists and small workshops adding laser marking to wood, acrylic and similar materials.

Capacity and headroom

The 20W output handles typical engraving tasks and light cutting on thin sheets. Thicker or denser materials will need multiple passes or a higher-powered machine.

Põhijooned

  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will the 20W laser module fit on the gantry of my existing open-frame engraver?

The 20W module is built for the RAY5 frame; mounting points and cable routing differ from most third-party gantries, so you would need a custom adapter plate and cable extensions to install it elsewhere.

How can I verify the air assist is actually delivering airflow during a cut?

Watch the nozzle while the pump runs — a steady stream should deflect light smoke from the cut line; if the beam leaves heavy residue or the pump is silent, check the hose for kinks and the pump inlet filter for blockage.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.