Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
LONGER RAY5 20W laser engraver with air assist kit

LONGER

LONGER RAY5 20W Laser Engraver with Air Assist

SKU CH-E1WH-XZFY9

A 20W laser engraver with an air-assist kit for cleaner cuts and engraving

Option 20W+Air Assist kit

Prikaži še 1 konfiguracij
  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

20W laser engraver with air assist

The LONGER RAY5 is a 20W laser engraver supplied with an air assist kit for cleaner cuts and reduced residue. It suits hobbyists and small workshops adding laser marking to wood, acrylic and similar materials.

Capacity and headroom

The 20W output handles typical engraving tasks and light cutting on thin sheets. Thicker or denser materials will need multiple passes or a higher-powered machine.

Poudarki

  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Will the 20W laser module fit on the gantry of my existing open-frame engraver?

The 20W module is built for the RAY5 frame; mounting points and cable routing differ from most third-party gantries, so you would need a custom adapter plate and cable extensions to install it elsewhere.

How can I verify the air assist is actually delivering airflow during a cut?

Watch the nozzle while the pump runs — a steady stream should deflect light smoke from the cut line; if the beam leaves heavy residue or the pump is silent, check the hose for kinks and the pump inlet filter for blockage.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.