Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
LONGER RAY5 20W laser engraver with air assist kit

LONGER

LONGER RAY5 20W Laser Engraver with Air Assist

SKU CH-E1WH-XZFY9

A 20W laser engraver with an air-assist kit for cleaner cuts and engraving

Option 20W+Air Assist kit

Sjá 1 stillingar til viðbótar
  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

20W laser engraver with air assist

The LONGER RAY5 is a 20W laser engraver supplied with an air assist kit for cleaner cuts and reduced residue. It suits hobbyists and small workshops adding laser marking to wood, acrylic and similar materials.

Capacity and headroom

The 20W output handles typical engraving tasks and light cutting on thin sheets. Thicker or denser materials will need multiple passes or a higher-powered machine.

Helstu kostir

  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 20W laser module fit on the gantry of my existing open-frame engraver?

The 20W module is built for the RAY5 frame; mounting points and cable routing differ from most third-party gantries, so you would need a custom adapter plate and cable extensions to install it elsewhere.

How can I verify the air assist is actually delivering airflow during a cut?

Watch the nozzle while the pump runs — a steady stream should deflect light smoke from the cut line; if the beam leaves heavy residue or the pump is silent, check the hose for kinks and the pump inlet filter for blockage.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.