Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
LONGER RAY5 20W laser engraver with air assist kit

LONGER

LONGER RAY5 20W Laser Engraver with Air Assist

SKU CH-E1WH-XZFY9

A 20W laser engraver with an air-assist kit for cleaner cuts and engraving

Option 20W+Air Assist kit

Lihat 1 konfigurasi lagi
  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

20W laser engraver with air assist

The LONGER RAY5 is a 20W laser engraver supplied with an air assist kit for cleaner cuts and reduced residue. It suits hobbyists and small workshops adding laser marking to wood, acrylic and similar materials.

Capacity and headroom

The 20W output handles typical engraving tasks and light cutting on thin sheets. Thicker or denser materials will need multiple passes or a higher-powered machine.

Ciri-ciri utama

  • 20 W laser output engraves and cuts wood, acrylic and leather
  • Air assist blows debris away for cleaner edges and less scorching
  • Compact desktop frame fits a home workshop or makerspace
  • Ready-to-use kit includes engraver and air-assist module

Spesifikasi

Belum ada spesifikasi diterbitkan untuk produk ini.

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will the 20W laser module fit on the gantry of my existing open-frame engraver?

The 20W module is built for the RAY5 frame; mounting points and cable routing differ from most third-party gantries, so you would need a custom adapter plate and cable extensions to install it elsewhere.

How can I verify the air assist is actually delivering airflow during a cut?

Watch the nozzle while the pump runs — a steady stream should deflect light smoke from the cut line; if the beam leaves heavy residue or the pump is silent, check the hose for kinks and the pump inlet filter for blockage.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.